Orion Blasters has moved to it's new home! The store should be up and running soon. Thank you all for your continued support. -Dan

Lynx Hardware Kit

From $58.50

Lynx Hardware Kit

Spring
Second Spring
Third Spring
Barrel
15.5" 0.527 Inner Diameter - General usage, for use with integral SCARs (see below)
18.5" 0.527 Inner Diameter - General usage, for use with most SCARs
18.0" 0.527 Inner Diameter - General usage, specifically for Silverfox's Pentavictus Scar
KuryKafe 40cm Barrel, 13mm Inner Diameter - Higher performance at the trade off of needing good darts, for use with integral SCARs
KuryKafe 40cm Barrel, 13mm Inner Diameter - Higher performance at the tradeoff of needing good darts, for use with most SCARs

If these options are overwhelming, pick the 18.5" 0.527 Barrel and K24 + K18 springs.

The weaker K31 spring is best when paired with the 15.5" 0.527 barrel. It usually is not strong enough to push darts through longer/tighter barrels.

Email when stock available

SKU: LHK Category:

Description

Sign up below for a restock email alert.

You can find a list of what’s included here.

Kits now include a reinforced catch. You can find details here.

A SCAR is a rifling device that goes on the end of the barrel. It spins the dart and helps accuracy. Scars come in a variety of shapes and sizes. They are recommended by not required.

If you plan on using a smaller scar (less than 3/4″ / 19mm in diameter), choose the 15.5″ or 40cm KuryKafe barrel option. Worker Scars (1,2,3,4) work well for this option.

If you don’t plan on using a scar, or plan on using a larger diameter scar (a good database here) choose the 18.5″ or 47cm KuryKafe barrel option.

If you’re wanting to use the Silverfox Pentavictus Scar, choose the 18.0″ 0.527 barrel option.

The spring options are K31 for 115 FPS, K24 for 150 FPS and K18 for 195 FPS.  You can find chrono results here. The lynx is compatible with all longshot and talonclaw springs. I only recommend the 15.5″ 0.527 barrel option for use with the k31 spring, as well as using fresh darts.

The Lynx is compatible with worker talon mags (or printed mags with the talon profile) and springer short darts (workers, ACCs, etc – any dart where the tip is smaller diameter than the foam).

Files, an assembly guide, list of licensed distributors and more can be found here.

Additional information

Weight 22 oz
Dimensions 22 × 2 × 2 in

Reviews

There are no reviews yet.

Be the first to review “Lynx Hardware Kit”

Your email address will not be published.